Is Albany, GA tap water safe?
Supplied by Albany Water System · serves 101,245 people (37,791 connections) · Groundwater · EPA ID GA0950000
Data: U.S. EPA · How we read the data · How we check it
Most of Albany gets its water from Albany Water System. Parts of the city are served by 5 smaller systems: USMC-Logistics (3,350 people), Hollands Folly Subdivision #1 (356 people), Creekside RV Park Water System (240 people), Carver Subdivision (111 people) and 1 more. Your water bill names your system.
Summary
No federal limits exceeded in EPA data.
- PFAS
- Detected, below limit2 of 29 PFAS found at least once. All averages below the federal limits.
- Lead
- Below action level2.2 ppb (parts per billion) at the 90th percentile: 9 in 10 homes sampled were at or below it. Action level 15 ppb, falling to 10 ppb in Nov 2027. Monitoring period Jan 2024 – now, still in progress (results reported so far). Your home's pipes can make yours higher.
- Violations
- None health-basedNo health-based violations since 2016.
- Built before 1986, or not sure what your service line is made of? Check your service line and test your tap. Utility data can't show your pipes.
- Want to reduce what was found? Filters for these results.
- Tested your own tap? Compare your result with these numbers. Moving? Compare this system with another.
- Read Albany Water System's annual water quality report (Consumer Confidence Report). It lists every regulated contaminant tested and is usually on the utility's website or mailed with your bill, and you can also request it at (229) 302-1603. EPA: how to find it.
PFAS (“forever chemicals”)
EPA UCMR 5: 6 entry points tested Jan 2025 to Jul 2025. "Average" is the highest entry-point average (non-detects counted as zero), the way EPA compares UCMR 5 results to the limits. ppt = parts per trillion. These results do not determine compliance.
| Contaminant | Highest average |
|---|---|
| PFOA Not detected Limit 4 ppt | – |
| PFOS Detected, below limit Limit 4 ppt | 4 ppt at the limit |
| PFHxS Not detected Limit 10 ppt | – |
| PFNA Not detected Limit 10 ppt | – |
| HFPO-DA (GenX) Not detected Limit 10 ppt | – |
| Hazard Index (a combined score for PFHxS, PFNA, GenX and PFBS, where above 1 is over the limit) Detected, below limit Limit 1 | 0.0031 |
| PFBS Detected, below limit Guideline 2,000 ppt | 6.25 ppt |
| PFBA Not detected Guideline 6,000 ppt | – |
| PFHxA Not detected Guideline 3,000 ppt | – |
29 PFAS tested, 2 detected at least once. "Not detected" means below EPA's reporting limit (about 2 to 20 ppt depending on the chemical), not proven zero. PFAS not listed were not detected. The limits for PFHxS, PFNA, GenX and the Hazard Index were proposed for rescission in May 2026. That proposal is not final. Systems have until 2029 to meet the limits.
Lithium
Not detected in 12 samples (reporting limit 9 ppb). About lithium.
Lead and copper
Latest 90th percentile: 2.2 ppb lead (Jan 2024 – now (in progress)). Below action level
Highest since 2016: 6.1 ppb (Dec 2016).
| Monitoring period | Lead (90th pct.) |
|---|---|
| Jan 2024 – now (in progress) | 2.2 ppb |
| Jan 2023 – Dec 2025 | 2.2 ppb |
| Jan 2022 – Dec 2024 | 2.2 ppb |
Earlier results (9)
| Jan 2021 – Dec 2023 | 2.2 ppb |
| Jan 2020 – Dec 2022 | 3.2 ppb |
| Jan 2019 – Dec 2021 | 3.2 ppb |
| Jan 2018 – Dec 2020 | 3.2 ppb |
| Jan 2017 – Dec 2019 | 2.5 ppb |
| Jan 2016 – Dec 2018 | 2.5 ppb |
| Jan 2014 – Dec 2016 | 6.1 ppb |
| Jan 2013 – Dec 2015 | 6.1 ppb |
| Jan 2011 – Dec 2013 | 3.8 ppb |
Lead comes from pipes and fixtures, not the source water, so it varies home to home. The 90th percentile means 9 in 10 sampled homes were at or below it. More on lead.
Violations
Health-based violations mean a contaminant exceeded a limit or a required treatment step was missed. Monitoring and reporting violations mean required tests or reports were late or missing, so the water's quality during that time is unknown. The total includes every violation in EPA's records, most of them paperwork.
Earlier EPA testing (2013–2020)
| Contaminant | Highest | Guideline |
|---|---|---|
| Manganese | 33.5 ppb | 300 ppb |
| Vanadium | 2.6 ppb | 21 ppb |
| Molybdenum | 2.2 ppb | 40 ppb |
| Chromium-6 | 1.38 ppb | – |
| Strontium | 0.36 ppm | 1.5 ppm |
Where it serves
Albany
ZIP codes the system reported serving: 31701, 31702, 31705, 31707, 31721
Nearby utilities
- Oak Street Subdivision Valdosta · 73 mi · PFAS above limit
- Cochran Water System Cochran · 74 mi · PFAS above limit
- Columbus Water System Columbus · 76 mi · PFAS above limit
- Houston County – Feagin Mill Warner Robins · 77 mi
- Warner Robins Water System Warner Robins · 77 mi
- Centerville Water System Centerville · 78 mi · PFAS above limit
Questions
Is Albany tap water safe to drink?
Most of Albany gets its water from Albany Water System. Albany Water System has no health-based violations since 2016. EPA testing found no PFAS above the federal limits. Federal data can't tell you about your own pipes: lead comes from service lines and plumbing, so test your tap if your home was built before 1986. For the official word, read the utility's annual Consumer Confidence Report.
Does Albany water have PFAS?
Yes. EPA's 2023–2025 testing of Albany Water System found 2 PFAS at least once. None of the averages were above the federal limits.
What is the lead level in Albany water?
The most recent 90th-percentile lead result for Albany Water System is 2.2 ppb, for the monitoring period that began Jan 2024 (still in progress). The federal action level is 15 ppb, falling to 10 ppb in November 2027. The 90th percentile means 9 in 10 homes sampled were at or below this number. Individual homes can be higher.
Check these numbers yourself
Every figure on this page comes from public EPA records. You don't have to take our word for it:
- EPA's own report for GA0950000: violations, enforcement and inspections, straight from EPA.
- EPA UCMR 5 data: the PFAS and lithium results (search the file for PWSID GA0950000).
- EPA SDWIS download: the lead results, population and violation records we use.
- The utility's annual water quality report (Consumer Confidence Report): ask Albany Water System at (229) 302-1603, or see EPA's guide to finding it.
Found something that doesn't match? Tell us and we'll check it against EPA's records. How we check our data.
Source: U.S. EPA drinking water records and PFAS testing (UCMR 5). How we read the data.